🧹 Maintenance & Closing Checklist

Member Responsibilities

• Dust Control: Wet-wipe surfaces to prevent spreading glass powder. No dry sweeping.
• Soldering Irons: Ensure irons are turned off and unplugged.
• Consumables: Use only what you need and notify the Manager when supplies run low.

🗑️ Glass Disposal

1. When the glass box is full, tape it securely shut.
2. Place the sealed box in the garbage (loose glass must never go into garbage bags).
3. Replace with a new box from the recycling bin and label it.

✅ Closing Checklist

• Soldering iron unplugged.
• All tools put away.
• Project board and glass stored.
• Grinders cleaned; surrounding surfaces wiped.
• Work area swept; floor mopped with Swiffer if needed.
• Lights turned off.